SS Series Blow Moulding machine for large bottle

    BRIEF INTRODUCTION

    Mega Machinerys’ SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the blower reduces your energy expenses by up to 30% at a maximum output of 1500?bottle per cavity per hour. Thanks to our GM Mr. Cai Yuansen who developed the patented mechanical designs which maximizes the performance of the?machine.

    Overview

    *Precise controller

    MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.

    *Preform loading system

    Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.

    *Infrared heating system

    A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.

    *Cast molded platen with toggle clamping unit

    Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.

    *Stretching system

    A double cylinder stretching unit is standard equipment , ?It provided?the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.

    Features

    1. Patented loading system carries the preform automatically with less moving parts.
    2. Suitable to produce 5L ~20L Standard neck PET container
    3. Advanced PLC control system with a use-friendly control panel
    4. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
    5. Multiple Reliable sensor systems monitors the machine’s automatic function
    6. Equipped with special designed air storage unit
    7. Powerful heating unit with precision controller and convenient adjusting mechanism.
    8. Cooling system that provides a perfect cooling result
    9. Compact design that saves space
    10. Simple installation & start up operation
    11. minimal transfer space for the air distribution system.

    Bottle SamplesPET bottles produced by SS series automatic reheat PET stretch blow molding machine:

    Specification

    General informationMG-SS2LMG-SS2ELMG-SS3LMG-SS4LMG-SS4EL
    Clamping Force50T55T58T68T80T
    Clamping Stroke200mm250mm220mm220mm250mm
    Max. Stretching Stroke500mm550mm380mm380mm550mm
    Bottom Moving Stroke70mm70mm70mm70mm70mm
    Number of Cavities2 Cavity2 Cavity3 Cavity4 Cavity4 Cavity
    Theoretical Output1600BPH1200BPH2500BPH3500 BPH2700BPH
    Max. Mould Thickness290mm322mm300mm300mm322mm
    Electrical System
    Voltage Standard380v/3PH/50Hzor special order
    Number of Heating Zone5 Sections7 Sections6 Sections8 Sections7 Sections
    Total Power (Full Loaded)60KW80KW80KW100KW120KW
    Container
    Max. Container Volume6L10L5L5L10L
    Neck Diameter Range50mm50mm50mm50mm50mm
    Max. Container Diameter190mm220mm190mm190mm220mm
    Max. Container Height350mm400mm360mm360mm400mm
    Air system
    Low Air consumption8-10Bar8-10Bar8-10Bar8-10Bar8-10Bar
    High Air consumption30-35 Bar30-35 Bar30-35 Bar30-35 Bar30-35 Bar
    Dimension & Weight
    Blow molding machine2.9×2.22×2.3m3.56x.22×2.3m4×2.15×2.2m4.2×2.15×2.2m5×2.2×2.3m
    Preform Autoloader2.5×1.6×2.8m2.5×1.6×2.8m2×1.2×2.2m2×1.2×2.2mm2.5×1.8×2.8m
    Net Weight5.5T6.5T7T8T10T
    General informationMG-SS1EXLMG-SS2EXL
    Clamping Force500KN1050KN
    Clamping Stroke330mm305mm
    Max. Stretching Stroke550mm550mm
    Bottom Moving Stroke60mm60mm
    Number of Cavities1 cavity2 Cavity
    Theoretical Output400BPH750BPH
    Max. Mould Thickness420mm420mm
    Electrical System
    Voltage Standard380v/3PH/50Hzor special order
    Number of Heating Zone8 Sections8 Sections
    Total Power (Full Loaded)45KW85KW
    Container
    Max. Container Volume5Gal5Gal
    Neck Diameter Range70mm70mm
    Max. Container Diameter280mm280mm
    Max. Container Height535mm535mm
    Air system
    Low Air consumption8-10Bar8-10Bar
    High Air consumption30-35 Bar30-35 Bar
    Dimension & Weight
    Blow molding machine4.8X2.15X1.6m5.8×2.2×1.9m
    Preform Autoloader_ __ _
    Net Weight4T6T

    Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

    Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

    日本日本熟妇中文在线视频骚虎